Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase Ib2, Union Pacific/We Can Handle It/Saturn Strobe Light New paint scheme New road numbers Era: Early to Late 1970s Series 800 to 830, Phase Ib2, built 7-8/1962 811 and 826 LED-illuminated Saturn 6552 Strobe Light* Series 831 to 874, Phase Ib2, built 8-10/1962 832 LED-illuminated Saturn 6552 Strobe Light* Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and blanked cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Small mirror mounted fore of left side cab window UP canvas sun awnings Lost-wax brass cast Leslie S-3L-R horn with clearance bracket, mounted on long hood left side aft of #1 radiator fan “Whip” antenna mounted on cab roof Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase Ib2, Union Pacific/We Can Handle It/Saturn Strobe Light New paint scheme New road numbers Era: Early to Late 1970s Series 800 to 830, Phase Ib2, built 7-8/1962 811 and 826 LED-illuminated Saturn 6552 Strobe Light* Series 831 to 874, Phase Ib2, built 8-10/1962 832 LED-illuminated Saturn 6552 Strobe Light* Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and blanked cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Small mirror mounted fore of left side cab window UP canvas sun awnings Lost-wax brass cast Leslie S-3L-R horn with clearance bracket, mounted on long hood left side aft of #1 radiator fan “Whip” antenna mounted on cab roof Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase Ib2, Union Pacific/We Can Handle It/Saturn Strobe Light New paint scheme New road numbers Era: Early to Late 1970s Series 800 to 830, Phase Ib2, built 7-8/1962 811 and 826 LED-illuminated Saturn 6552 Strobe Light* Series 831 to 874, Phase Ib2, built 8-10/1962 832 LED-illuminated Saturn 6552 Strobe Light* Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and blanked cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Small mirror mounted fore of left side cab window UP canvas sun awnings Lost-wax brass cast Leslie S-3L-R horn with clearance bracket, mounted on long hood left side aft of #1 radiator fan “Whip” antenna mounted on cab roof Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase Ib2, Union Pacific/We Can Handle It/Federal Signal Rotary Beacon New paint scheme New road numbers Era: Early to Late 1970s Series 800 to 830, Phase Ib2, built 7-8/1962 811 and 826 LED-illuminated Saturn 6552 Strobe Light* Series 831 to 874, Phase Ib2, built 8-10/1962 832 LED-illuminated Saturn 6552 Strobe Light* Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and blanked cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Small mirror mounted fore of left side cab window UP canvas sun awnings Lost-wax brass cast Leslie S-3L-R horn with clearance bracket, mounted on long hood left side aft of #1 radiator fan “Whip” antenna mounted on cab roof Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase Ib2, Union Pacific/We Can Handle It/Federal Signal Rotary Beacon New paint scheme New road numbers Era: Early to Late 1970s Series 800 to 830, Phase Ib2, built 7-8/1962 811 and 826 LED-illuminated Saturn 6552 Strobe Light* Series 831 to 874, Phase Ib2, built 8-10/1962 832 LED-illuminated Saturn 6552 Strobe Light* Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern 81” GP30 low short hood with ratchet handbrake, chain guard, and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and blanked cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Small mirror mounted fore of left side cab window UP canvas sun awnings Lost-wax brass cast Leslie S-3L-R horn with clearance bracket, mounted on long hood left side aft of #1 radiator fan “Whip” antenna mounted on cab roof Accurate hood door and long hood detail Early 2-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30B Freight Phase Ie, Union Pacific/We Can Handle It New paint scheme New road numbers Era: Early to Late 1970s Series 700B to 727B, Phase Ie, built 4/1963 718B Standard “B-Unit” high hood Wire inertial air intake grills Standard walkway Fully-assembled LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern High hood with ratchet handbrake with chain guard Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on high short hood Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of high and long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC **“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30B Freight Phase Ie, Union Pacific/We Can Handle It New paint scheme New road numbers Era: Early to Late 1970s Series 700B to 727B, Phase Ie, built 4/1963 718B Standard “B-Unit” high hood Wire inertial air intake grills Standard walkway Fully-assembled LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern High hood with ratchet handbrake with chain guard Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on high short hood Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of high and long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC **“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30B Passenger Phase IIa, Union Pacific/We Can Handle It New paint scheme New road numbers Era: Early to Late 1970s Series 700B to 727B, Phase Ie, built 4/1963 718B Standard “B-Unit” high hood Wire inertial air intake grills Standard walkway Fully-assembled LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern High hood with ratchet handbrake with chain guard Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on high short hood Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of high and long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC **“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30B Passenger Phase IIa, Union Pacific/We Can Handle It New paint scheme New road numbers Era: Early to Late 1970s Series 700B to 727B, Phase Ie, built 4/1963 718B Standard “B-Unit” high hood Wire inertial air intake grills Standard walkway Fully-assembled LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted dual multiple unit (MU) receptacle stands with field loop receptacles “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern High hood with ratchet handbrake with chain guard Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on high short hood Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of high and long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC **“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase IIa, Louisville & Nashville/ex-C&EI Patched New roadname New paint scheme Era: Late 1960s Series L&N 1058 to 1060, ex-MP 590 to 592, ex-C&EI 239 to 241, Phase IIa, built 6/1963 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at bottom mounted fore of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Nathan P-3 (P142 configuration) horn, mounted on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Stamped inertial air intake grills with vertical stiffeners Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan Late see-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauge in right side of fuel tank Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Prime mover sound Turbocharged 16-567D3 prime mover sound (original) ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase IIa, Family Lines System/L&N/Gyralite New roadname New paint scheme Era: Early 1980s Series L&N 1029 to 1048, Phase IIa/IIb, built 6-9/1963 Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated Pyle-National #20585 Gyralite dual signal light mounted in number board housing* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers with loop handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with no handbrake, and with square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on low short hood GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-5T-RRO horn mounted on cab roof “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Tall turbo exhaust stack Non-dynamic brake housing with blanked intakes and fan 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans, 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service GE type speed recorder mounted to #2 axle, right side Frame-mounted bell 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase IIa, Family Lines System/L&N/Gyralite New roadname New paint scheme Era: Early 1980s Series L&N 1029 to 1048, Phase IIa/IIb, built 6-9/1963 Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated Pyle-National #20585 Gyralite dual signal light mounted in number board housing* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers with loop handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with no handbrake, and with square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on low short hood GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-5T-RRO horn mounted on cab roof “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Tall turbo exhaust stack Non-dynamic brake housing with blanked intakes and fan 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans, 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service GE type speed recorder mounted to #2 axle, right side Frame-mounted bell 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• mit DCC Motordekoder
• mit Sound

Rivet Counter HO Scale EMD GP30 Phase IIb, Family Lines System/L&N New roadname New paint scheme Era: Early 1980s Series L&N 1029 to 1048, Phase IIa/IIb, built 6-9/1963 Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated Pyle-National #20585 Gyralite dual signal light mounted in number board housing* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers with loop handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with no handbrake, and with square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on low short hood GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-5T-RRO horn mounted on cab roof “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Tall turbo exhaust stack Non-dynamic brake housing with blanked intakes and fan 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans, 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service GE type speed recorder mounted to #2 axle, right side Frame-mounted bell 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung 1 Quartal 2027

• DCC vorbereitet (Schnittstelle vorhanden)

Rivet Counter HO Scale EMD GP30 Phase IIb, Family Lines System/L&N New roadname New paint scheme Era: Early 1980s Series L&N 1029 to 1048, Phase IIa/IIb, built 6-9/1963 Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* LED-illuminated Pyle-National #20585 Gyralite dual signal light mounted in number board housing* LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** LED-illuminated, printed and backlit cab and long hood end number boards Front and rear multiple unit (MU) hose catch bars 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Front and rear straight uncoupling levers with loop handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with no handbrake, and with square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on low short hood GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie S-5T-RRO horn mounted on cab roof “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Tall turbo exhaust stack Non-dynamic brake housing with blanked intakes and fan 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans, 36” pan-top center radiator fan Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service GE type speed recorder mounted to #2 axle, right side Frame-mounted bell 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Two (2) cube-type speakers Turbocharged 16-567D3 prime mover sound ESU designed “PowerPack” with two super capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***“PowerPack” feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Neuerscheinung! Auslieferung November 2026

Rivet Counter HO Scale Trinity 60' 6886 12' Plug-Door High-Cube Insulated EcoBox Boxcar/Trinity Leasing/Black and Yellow All-new model Era: 2023 to present Series 793240 to 793314; built 01-06/2023 Road numbers 793257, 793274, and 793280 05/2023 Build Date Road numbers 793290, 793310, and 793311 06/2023 Build Date Fully assembled Multiple road numbers Anti-graffiti high reporting mark and numbers 8 left and 8 right side posts Single 12’ plug door 3 over 2 rail non-terminating ends with vertical section 12’ door with enclosed box center sill and spray foam insulation 2-rib end panels and 3-rib center panels with flat seam roof Finely detailed brake plumbing, linkage, triple valve, air reservoir, brake cylinder, and actuator Separately applied brake wheel, stand, and chain Factory-applied wire trainline pipe with brackets Factory-applied, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers with long shanks, painted a dingy gray/brown color to represent the color of couplers in service Highly detailed Barber S-2-HD-9C 110-ton trucks with finely rendered raised foundry data; rotating blue Timken three-sided bearing caps; separate truck-mounted brake beams; and side bearing detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification FRA-224 yellow conspicuity stripes Weighted to Industry standards for reliable operation Packaging safely stores the model Minimum radius: 22” Recommended radius: 24”